Technical Data Sheet Endex? 155 Hydrocarbon Resin

Applications 

• Adhesives/sealants-b&c

• Bookbinding

• Carpet construction

• Case & carton sealing closings

• Casting wax

• Commerical printing inks

• Concrete

• Film modification

• Hygiene adhesives

• Labels non food contact

• Marine

• Packaging components non food contact Packaging tape

• Polymer modification

• Protective coatings

• Roofing

• Solvent borne packaging adhesives Specialty tape

• Tape non food contact

• Tires

Key Attributes

• Heat stability

• Pure aromatic monomer composition Very high softening point 

• Water-white initial color
  
  

  
  

Product Description

A water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Used to modify the melt flow and increase the temperature resistance of styrenic plastic and rubber. Reinforces the styrene end blocks of styrenic block copolymers. In adhesives Endex? 155 hydrocarbon resin will associate with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties.

Typical Properties

Compatibility and Solubility

Compatible with polystyrene or styrene-containing polymers. Incompatible with polyolefins, natural rubber, butyl rubber, EPDM, and EVA. Soluble in aliphatic, aromatic, and chlorinated hydrocarbons; esters; and ketones. Insoluble in alcohols and glycols; limited solubility in nitroparaffins. For low or zero VOC systems Endex? 155 is soluble in the VOC exempt solvents t-butyl acetate (TBA) and perchlorobenzenetetrafluoride (PCBTF) and will tolerate some acetone and/or methyl acetate as a diluent in solvent systems based on TBA and/or PCBTF. VOC exemptions and environmental regulations vary regionally and compliance with local standards should be verified before any claims about VOC content are made.

Packaging

Pastilles, in multiwall paper bags (50 lbs, 22. 7 kg net wt).

Storage

Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature, 2) prolonged storage, 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area, be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

無錫市鎰遠新材料科技有限公司專業供應美國伊斯曼公司（EASTMAN）進口純單體樹脂，碳氫樹脂，增粘樹脂、烴樹脂、防濕滑樹脂。品種齊全，無錫現貨，用途廣泛，適用于塑料，橡膠，膠粘劑的改性與增粘，具有非常好的色度（水白色）和穩定性，可加強耐熱性和強度等多種性能。

生產商：美國伊斯曼公司EASTMAN

公司：無錫市鎰遠新材料科技有限公司

聯系方式：13951578110

牌號有：

1）Kristalex  5140（LV、SD）

2）Kristalex  1120

3）Kristalex  3115

4）Kristalex  3100

5）Kristalex  3085

6) Kristalex  F 115

7) Kristalex  F 100

8) Kristalex  F 85

9）Piccotex  LC

10）Piccotex  100

11）Piccotex  120

12）Piccolastic   D125

13）ENDEX 155

14）ENDEX 160

15）Plastolyn 240

16）Plastolyn 290

17）Piccolastic A75

18）Kristalex  3105

19) Impera1504

應用：1.膠黏劑產品：比如是各種SBS，SIS，SEBS，EVA，聚氨酯、氯丁膠粘劑、包裝膠、毛紡布粘合等類型的膠粘劑的增粘劑、增強劑和改性劑。

2.油墨、涂料行業：提高柔韌性，拉伸力、粘結強度，耐油墨溶劑改進時間和凝結時間。

3.橡塑改性，提高加工表面和產品物性。

4.彈性體（TPE、TPR）包膠改性等。